MT Altaş İnşaat Natural Stone Case Study

Pursaklar Kösrelik Kızığı Flagstone Installation Project

This English case study presents a completed natural flagstone paving project in Kösrelik Kızığı, Pursaklar, Ankara. The page is written as a separate global SEO article, not as a literal translation, and explains the technical decisions behind outdoor stone flooring, natural slate paving, ground preparation, drainage, joint filling and final cleaning.

The project was evaluated with MT-Altaş ProMetraj V21.3 Enterprise Software using field data such as a 15 m² application area, 1.2 tons of transported flagstone, installed stone quantity, sand bedding, cement use, waste allowance, labor planning and site delivery steps.

15 m² case study1.2 tons of flagstonePursaklar / Ankara / TürkiyeProMetraj V21.3 supported
Natural flagstone installation project in Pursaklar Kosrelik Kizigi Ankara

Field Data, Material Use and Quantity Optimization

A successful outdoor flagstone installation depends on more than the visible stone surface. Material logistics, field consumption, waste control, bedding thickness, cement use and cleaning procedures all affect the final result. In this Ankara project, every practical variable was treated as part of a measurable installation workflow.

Application area

15 m² natural slate flagstone paving area for outdoor use.

Stone quantity

1,200 kg transported, about 1,125 kg installed and around 75 kg remaining material.

Bedding and joints

Sand bedding, cement-based fixing and joint filling were adjusted to site conditions.

Digital planning

The project was reviewed with MT-Altaş ProMetraj V21.3 Enterprise Software.

Flagstone Installation Contractor: MT Altaş İnşaat

MT Altaş İnşaat is an Ankara-based construction and outdoor paving contractor providing project-based natural stone, flagstone, concrete tile, interlocking paver, curb stone, andesite stone and landscape ground solutions across Türkiye. For an English page targeting global traffic, the business identity, service area, technical planning process and software-supported quantity analysis are written clearly so international users and search engines can understand the contractor behind the project.

Company

MT Altaş İnşaat / MT Altas Construction

Service scope

Flagstone supply, site survey, paving, quantity takeoff and technical support.

Coverage

Ankara-centered, project-based service across Türkiye.

Software layer

MT-Altaş ProMetraj V21.3 Enterprise Software.

Flagstone Installation Cost Factors, Outdoor Stone Paving and Natural Slate Flooring

International visitors often search for practical terms such as flagstone installation cost, natural slate paving, outdoor stone flooring, garden path flagstone, patio stone installation and project-based paving contractor in Türkiye. This English article uses the Pursaklar Kösrelik Kızığı project as a real-world case study while explaining the engineering decisions behind durable natural stone surfaces.

Flagstone installation cost factors

Cost is shaped by square meter quantity, stone thickness, tonnage, transport distance, sub-base quality, sand, cement, joints, waste ratio and labor details.

Natural slate paving for gardens

Slate flagstone provides a textured, non-slip surface for garden paths, villa surroundings, terraces, courtyards and landscape transitions.

Outdoor stone flooring in Türkiye

Türkiye-based projects require attention to climate, slope, drainage, site access, local material availability and regional labor conditions.

Flagstone vs. concrete pavers

Flagstone creates a more organic natural look, while concrete pavers provide modular repetition. The right choice depends on use, design and budget.

Ground preparation and drainage for natural flagstone paving

Ground Preparation, Drainage and Long-Term Stability

The long life of a flagstone floor is determined by what happens below the stone. Before placing the visible surface, the sub-base must be compacted, the slope must be controlled and water must be directed away from buildings and weak soil zones. In the Pursaklar project, the bedding layer and drainage direction were evaluated together to reduce movement, settlement and surface puddling.

  • Level control: finished levels must support water runoff without creating unsafe walking edges.
  • Sub-base stability: proper compaction reduces rocking, sinking and joint cracking.
  • Drainage planning: surface water should move away from walls, entrances and stone bedding.
  • Bedding method: sand or mortar bedding must match stone thickness and site conditions.

Natural Stone Selection and Landscape Character

Natural flagstone is preferred in outdoor design because every piece has a unique shape, texture and color variation. This creates a warmer, less industrial look than standard modular paving. Good stone selection also considers walking comfort, surface grip, thickness consistency, edge quality and the relationship between the stone and surrounding architecture.

  • The right stone selection improves both the visual value and the installation speed.
  • Material weight, waste percentage, handling time and joint strategy should be planned before installation.
  • For gardens, terraces and villa surroundings, non-slip texture and color harmony are especially important.
Natural slate flagstone selection for landscape paving
Flagstone layout technique and natural stone paving workmanship

Layout Technique, Joint Balance and Craftsmanship

Unlike factory-shaped paving units, natural flagstone must be arranged piece by piece. The installer has to read the stone shapes, balance the joints and create a stable surface without forcing the natural geometry. Correct layout improves both appearance and performance.

  • Interlock logic: stones should support one another and avoid weak continuous joint lines.
  • Texture flow: natural grain and color movement should be considered during placement.
  • Joint balance: gaps should be visually natural but technically controlled.
  • Walking comfort: level differences must be checked continuously during installation.

Final Cleaning and Handover Quality Control

Final cleaning is the stage where the quality of the work becomes visible. Cement marks, dust, joint residue and installation debris must be removed without damaging the natural face of the stone. In a high-quality handover, the contractor checks not only the appearance but also the walking level, joint continuity and drainage behavior.

  • The true color and texture of natural slate appear after controlled cleaning.
  • A clean surface helps the customer evaluate workmanship, alignment and visual consistency.
  • Mild cleaning methods protect the stone better than harsh chemical treatment.
Final cleaning of natural flagstone paving after joint filling

Joint Filling and Surface Protection

After the flagstone pieces are set, the joints must be filled with a method suitable for the surface, climate and expected use. A poor jointing method may stain the stone, trap moisture or weaken the visual quality of the finished floor. A controlled jointing process improves surface integrity and makes maintenance easier.

Material choice
Joint mortar, sand or a combined method should match the stone and traffic level.
Moisture control
Excessively wet mixes can create visible residue or lime marks on natural stone.
Cleaning timing
Surface residue should be removed before it bonds strongly to the stone texture.

SaaS-supported technical infrastructure

Project Planning with MT-Altaş ProMetraj V21.3 Enterprise Software

MT-Altaş ProMetraj V21.3 Enterprise Software is a web-based construction calculation platform developed for quantity takeoff, tonnage, transport, sand, cement, waste allowance, labor and total cost analysis in flagstone, concrete tile, interlocking paver, curb stone, andesite stone, marble, decorative stone, concrete and steel-related project groups.

The software was developed and founded by Burhan Altaş. It combines the field experience of MT Altaş İnşaat with a digital analysis layer, positioning the company as a SaaS-supported application and technical information center for outdoor ground solutions.

MT Altaş Calculator

MT Altaş Calculator is a professional construction calculation interface for quantity takeoff, pallet planning, tonnage, transport, sand, cement, waste ratio, labor and total cost analysis in natural stone and ground application projects.

If the calculator does not open, open MT Altaş Calculator in a new tab.

Request a Project-Based Flagstone Installation Quote

For natural flagstone paving projects like the Pursaklar Kösrelik Kızığı case study, you can contact MT Altaş İnşaat for site survey, quantity takeoff, material selection, installation planning and technical support.

Frequently Asked Questions About Flagstone Installation

How is flagstone installation cost calculated?

The cost depends on square meter quantity, stone tonnage, thickness, transport distance, ground preparation, sand and cement consumption, joint method, labor scope and site access.

Does MT Altaş İnşaat provide flagstone installation across Türkiye?

Yes. MT Altaş İnşaat is based in Ankara and provides project-based natural stone sales, site survey, installation and technical support across Türkiye.

What does ProMetraj V21.3 do in flagstone projects?

ProMetraj V21.3 supports quantity takeoff, tonnage planning, waste ratio, transport, sand, cement, labor and total project cost analysis for controlled proposal planning.

Why are joints and final cleaning important in natural flagstone paving?

Joint filling improves the integrity of the floor, while final cleaning reveals the true color and texture of the stone. Poor mortar consistency or late cleaning can leave visible surface marks.